-
What should I do if the fan of the extruder does not rotate?
The main reason that the extruder fan does not rotate is that the circuit is disconnected or the fan is damaged. First, check whether the fan is stuck by other things. If not, check whether the line is disconnected or the interface is loose. If the line i...
2020-11-13 -
What should I do if the printing platform heats up abnormally?
The main reason for abnormal heating of the print platform is a problem with the heating cable or a short circuit of the heating plate. The solution is to check whether the cable is burnt or loose, and reconnect or replace the cable. If there is no proble...
2020-11-13 -
What should I do if the nozzle leaks material?
The main reason for nozzle leakage is that the nozzle, heating block and metal tube are not tightened, and the melted material will leak from the thread gap. If material leakage occurs after changing the nozzle, heat it to melt the material first, and the...
2020-11-13 -
3D Printed Sensor that can recognize coronavirus in 10 seconds Developed by Carnegie Mellon Universi
Recently, researchers at Carnegie Mellon University (CMU) 3D printed a sensor that can recognize Covid-19 antibodies in about 10 seconds. The technology is produced using an additive manufacturing system supplier Optomec's patented aerosol jet printin...
2020-10-26 -
What is the Application of 3D Printer and 3D Scanner in the field of archaeology?
3D scanners and 3D printers have been reconstructed and restored by many countries around the world to restore cultural and historical heritage. For example, in 2019, the project developed by the archaeological team of the University of California, Los An...
2020-10-26